Do you know how to program Peugeot 307 remote keys by using Lexia 3 Diagbox? Check below steps!
Connect Lexia3 Diagnostic Scanner Tool with Peugeot 307 via OBD2 port.
Turn ignition on and open Diagbox software.
Select car brand “Peugeot”.
Select car model “307”.
Go to “Diagbox” and “Repair”.
It will automatically do a Global Test to all car modules. After that you click “BSI” control unit.
Then choose “Configuration”, “Learning” and “Programming of keys” as below:
To program new keys, you need car pin code.
Enter pin code as “BSI Confidential Code” then follow the tip to enter it again.
Next you can enter the key number you want to program.
Follow the instruction: turn ignition off then within 15 seconds you should insert the new key to turn ignition on.
New key#1 is programmed OK. Turn ignition off and remove the key.
Insert new key#2 in ignition, turn ignition off then within 15 seconds you should insert the new key to turn ignition on.
In this way, you successfully program new remote keys for Peugeot 307 using Lexia 3 Diagnostic Tool!
www.diyobd2.fr all rights reserved, Original Article url:How to program Peugeot 307 remote key by Lexia 3 Diagbox?